Use USB Drive As A Ram

Use USB Drive As A RamAkhbar nama is going to tell you how to utilize an usb thumb drive as a practical RAM device for your Pc The thumb drive a person used is a 2 Gb from Kingston. The size has to be less than 4 Gb.

When a person looks at the screenshots below you ought to think that it is in German.

  • Rename your thumb drive  as “RAM DRIVE”, so you are able to look at that it is the one which is utilized as RAM.
  • Get all the stuff of the pen drive Deleted. Also look at hidden once.
  • Right select on “My Computer” –> Properties

step1

  • Select on “Advanced” –> system output “Settings”

step2

  • Select on “Advanced” –>  “Edit”

step4

  • Select on your thumb drive above  –> “user-defined size”  –> you are able to look at the size of your flash drive (in this case 1932 Mb) calculate: size of flash drive – 5 Mb in this case: 1932 – 5 = 1927. Now type this number in the first box. In the second box you type in the same number (see picture) –>

step5

  • Select “set” and “OK”
  • Select “Apply”, click not “Cancel” or  “OK”.

After selecting “Apply”, click “OK”.
Restart your computer.

[alert-success] Warning:
Don´t take your thumb drive out after making this settings, because it´s utilized as virtual RAM device. It might break down your computer if you take out your thumb drive. We would not responsible for those cases[/alert-success]

If your computer didn´t obtain really faster or you include other reasons to eliminate the USB thumb drive than take the following steps:

Select the step 6 and choose your USB thumb drive, than select “no swapfile” –> “Set” –>”OK” –> “Apply”

Comments (5)

  1. Munir Ahmed Naz September 23, 2014
  2. ilyas khan September 20, 2014
  3. pir irfan shah September 20, 2014
  4. salman ali September 20, 2014
  5. Tiger September 19, 2014

Leave a Reply